Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone, (besides me), downloaded C2800NM_RM2.124-13r.T11 ROMMON image and tried to upgrade to it. When I hit enter on this command: upgrade rom-monitor file usbflash0:C2800NM_RM2.124-13r.T11 it comes back with the no srec file error message. I'm ...
I have a print server that sits on the 192.168.1.0 network. Anything on this network is able to print to this print server. Anything on my other networks that use IP Inspect are able to print to this print server, when using IOS version 12.3-11T7. ...
Under IOS 12.3.11T5 my LPR printers work when printing from a Workstation on my 192.168.4.0 network to a printserver on the 192.168.1.0 network. When I run IOS version 12.3.14T2 the print request does not respond. No errors are logged on the router...
Here is a finding for those who have upgraded or purchased a new 2621XM with memory above 128MB. I have verified that the advanced Security IOS version 12.3(11T3), will crashdump and reload, when attempting to VPN from a client inside the network to...
Does anyone have any idea what this means?Unexpected exception to CPUvector 1200, PC = 0x804FB77C, LR = 0x804FB770-Traceback= 804FB77CCPU Register Context:MSR = 0x00001032 CR = 0x53000003 CTR = 0x804FB8E0 XER = 0x8000007FR0 = 0x804FB770 R1 =...
I'm running 12.4(13r)T6 ROMMON image currently also. Let me know if you get the same error, perhaps Cisco posted a corrupted image, (or I'm missing something)!
Upon further investigation, I've found if I remove the command from inspect that is:no ip inspect name McDonald tcpThe printserver responds. Of course anything going out through on the outside nat interface doesn't work without the tcp inspect comma...
I get the following prompt when attempting the telnet connection:Connecting To 192.168.1.3...Could not open a connection to host: Connect failedWhen 12.3.11-T5 is loaded it connects properly. I've tried modifying the Inspect commands and allowing LP...
I'll have to schedule another maintenace time to install the 12.3.14T2 IOS again. The router is running the IOS firewall, which allows TCP traffic through from any host on the 192.168.1.0 and 192.168.4.0 networks. There are several new Firewall com...
