Hi, It´s possible to make a video call between a 7975 and a 9971, ou other SIP phone, with video capabilities? I tried to Set the Video call, but the 7975 do not show the camera of the 9971 phone. Thanks, ... View more

Hi, Recently bought a compact flash to upgrade a Cisco1841. But it does not pass in the boot up process. I can format it, can pass the IOS by tftp, or any other ways, but seems that the ATA monlib part of it do not work well. Here are some output of my router: C1841# C1841# C1841#forma C1841#format flash: Format operation may take a while. Continue? [confirm] Format operation will destroy all data in "flash:".  Continue? [confirm] Format: All system sectors written. OK... Format: Total sectors in formatted partition: 239872 Format: Total bytes in formatted partition: 122814464 Format: Operation completed successfully. Format of flash: complete C1841# C1841# C1841#copy tftp: flash: Address or name of remote host []? 192.168.10.11 Source filename []?c1841-adventerprisek9-mz.151-4.M4.bin Destination filename [c1841-adventerprisek9-mz.151-4.M4.bin]? Accessing t ftp://192.168.10.11/c1841-adventerprisek9-mz.151-4.M4.bin ... Loading c1841-adventerprisek9-mz.151-4.M4.bin from 192.168.10.11 (via FastEthernet0/0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [OK - 47396548 bytes] 47396548 bytes copied in 212.660 secs (222875 bytes/sec) C1841# C1841# C1841# C1841# C1841#sh flash: all -#- --length-- -----date/time------ path 1     47396548 Nov 30 2012 13:34:18 c1841-adventerprisek9-mz.151-4.M4.bin 75272192 bytes available (47398912 bytes used) ******** ATA Flash Card Geometry/Format Info ******** ATA CARD GEOMETRY    Manufacturer Name         Model Number           STI Flash 7.2.0        Serial Number          STI1J80407108103014    Firmware Revision      12-17-04    Number of Heads        8        Number of Cylinders    937      Sectors per Cylinder   32       Sector Size            512      Total Sectors          239872 ATA PARTITION 1 INFO    Start Sector           0        Number of Sectors      239872    Size in Bytes          122814464    File System Type       FAT16    Number of FAT Sectors  118      Sectors Per Cluster    8        Number of Clusters     29949    Number of Data Sectors 239592    Base FAT Sector        8        Base Root Sector       244      Base Data Sector       276   ATA MONLIB INFO    Image Monlib size      117868    Disk Monlib Size       NA    Disk Space Available   NA    Name                   NA    End Sector             NA    Start sector           NA    Updated By             NA    Version                NA C1841# I tried with other touter, to see if it is some problem with the router, but if i change the flash card, it works. Does any one have any idea how can a format that Monlib part of the flash? I tried to upgrade filesys monlib flash:, but no success at all. C1841#upgrade filesystem monlib flash: %Error upgrading monlib in flash: (No such device) C1841# When i boot the router, i stop on ROMMOM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c1841 platform with 262144 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized program load complete, entry point: 0x8000f000, size: 0xcb80 open(): Open Error = -66 boot: cannot open "flash:" boot: cannot determine first executable file name on device "flash:" System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c1841 platform with 262144 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized program load complete, entry point: 0x8000f000, size: 0xcb80 open(): Open Error = -66 boot: cannot open "flash:" boot: cannot determine first executable file name on device "flash:" System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c1841 platform with 262144 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized rommon 1 > rommon 1 > dir flash: program load complete, entry point: 0x8000f000, size: 0xcb80 open(): Open Error = -66 dir: cannot open device "flash:" rommon 2 > Does any one have any comments or suggestions for me? ... View more