11-30-2012 05:40 AM - edited 03-03-2019 06:51 AM
Hi,
Recently bought a compact flash to upgrade a Cisco1841. But it does not pass in the boot up process.
I can format it, can pass the IOS by tftp, or any other ways, but seems that the ATA monlib part of it do not work well.
Here are some output of my router:
C1841#
C1841#
C1841#forma
C1841#format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:". Continue? [confirm]
Format: All system sectors written. OK...
Format: Total sectors in formatted partition: 239872
Format: Total bytes in formatted partition: 122814464
Format: Operation completed successfully.
Format of flash: complete
C1841#
C1841#
C1841#copy tftp: flash:
Address or name of remote host []? 192.168.10.11
Source filename []?c1841-adventerprisek9-mz.151-4.M4.bin
Destination filename [c1841-adventerprisek9-mz.151-4.M4.bin]?
Accessing tftp://192.168.10.11/c1841-adventerprisek9-mz.151-4.M4.bin...
Loading c1841-adventerprisek9-mz.151-4.M4.bin from 192.168.10.11 (via FastEthernet0/0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 47396548 bytes]
47396548 bytes copied in 212.660 secs (222875 bytes/sec)
C1841#
C1841#
C1841#
C1841#
C1841#sh flash: all
-#- --length-- -----date/time------ path
1 47396548 Nov 30 2012 13:34:18 c1841-adventerprisek9-mz.151-4.M4.bin
75272192 bytes available (47398912 bytes used)
******** ATA Flash Card Geometry/Format Info ********
ATA CARD GEOMETRY
Manufacturer Name
Model Number STI Flash 7.2.0
Serial Number STI1J80407108103014
Firmware Revision 12-17-04
Number of Heads 8
Number of Cylinders 937
Sectors per Cylinder 32
Sector Size 512
Total Sectors 239872
ATA PARTITION 1 INFO
Start Sector 0
Number of Sectors 239872
Size in Bytes 122814464
File System Type FAT16
Number of FAT Sectors 118
Sectors Per Cluster 8
Number of Clusters 29949
Number of Data Sectors 239592
Base FAT Sector 8
Base Root Sector 244
Base Data Sector 276
ATA MONLIB INFO
Image Monlib size 117868
Disk Monlib Size NA
Disk Space Available NA
Name NA
End Sector NA
Start sector NA
Updated By NA
Version NA
C1841#
I tried with other touter, to see if it is some problem with the router, but if i change the flash card, it works.
Does any one have any idea how can a format that Monlib part of the flash?
I tried to upgrade filesys monlib flash:, but no success at all.
C1841#upgrade filesystem monlib flash:
%Error upgrading monlib in flash: (No such device)
C1841#
When i boot the router, i stop on ROMMOM:
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
PLD version 0x10
GIO ASIC version 0x127
c1841 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
open(): Open Error = -66
boot: cannot open "flash:"
boot: cannot determine first executable file name on device "flash:"
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
PLD version 0x10
GIO ASIC version 0x127
c1841 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
open(): Open Error = -66
boot: cannot open "flash:"
boot: cannot determine first executable file name on device "flash:"
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
PLD version 0x10
GIO ASIC version 0x127
c1841 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initialized
rommon 1 >
rommon 1 > dir flash:
program load complete, entry point: 0x8000f000, size: 0xcb80
open(): Open Error = -66
dir: cannot open device "flash:"
rommon 2 >
Does any one have any comments or suggestions for me?
11-30-2012 08:35 AM
Use a CF that works.
11-30-2012 04:00 PM
75272192 bytes available (47398912 bytes used)
WTF???
How big is this CF???
The largest size I've seen an ISR G1 router can support is about 8 Gb.
12-01-2012 03:02 PM
As OP shown above, that is a 128 MB CF.
12-03-2012 05:03 AM
Paolo Bevilacqua,
What a wonderful ideia!!
I´m tryng to solve the problem, not to skip it.
But thanks for your great answer. I really proud of you!
I have solve the problem anyway.
Seems that the flash card lost it´s partitions sometimes.
So, we have to format all the partitions, including that ones that are not formated for the normal process of format flash:
If there is someone with the same problem, please, concact me, so i can give you a advice that can really help you.
12-03-2012 08:18 AM
Your sarcasm aside...
Before you said that you have formatted the flash, then it turned out it had not been formatted properly.
Due to that I've inferred that there was some HW incompatibly with the CF. You may wonder, but it happens.
Hope the next time you can be more appreciative for those that give correct advice, with the will to help (check rating). Good luck.
01-15-2014 01:45 AM
i got same problem with you..please help me.. i tried anything but doesnt work..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide