Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guys, C897VAG-LTE-GA-K9 I give up! I can't get my head around why I don't have connection to outside world via Virgin Media HUB (UK). I can connect to local devices though. Please take a look at running-config and tell me what do I miss Route...
Hello there, Maybe someone or even Cisco itself could help me with tips how to obtain devnet associate exam voucher discount? They are 295£ in UK which is quite expensive for someone who's learning himself.
Hello, I have virgin media fiber coming to virgin hub 3 in (modem mode) and from hub connected to 897 isr "GE WAN" port which comes up as Gi8 port. The problem is that any website takes about 5 seconds to start loading and I have very weird ARP table...
Hello I can't get my MikroTik access point route to internet. It looks like I can ping internet from ap itself and clients connects to it via DHCP but I suspect something is wrong with ISR configuration.
Hi everyone i have AIR-CAP3502I-E-K9 as stand alone connected to my cisco isr and the maximum speed I can achieve is about 47mbps on 802.11n . I tried setting different modulation and channel width, inreasing antenna power etc. and nothing! below is ...
Georg It looks like DHCP works as intended my Mac ethernet interface Router(config)#do show ip dhcp bindingBindings from all pools not associated with VRF:IP address Client-ID/ Lease expiration TypeHardware address/User name10.10.10.2 ecb5.fa2f.db9...
By the way WIFI works just fine. I have MikroTik AP and its set to find address via DHCP Router#show ip dhcp bindingBindings from all pools not associated with VRF:IP address Client-ID/ Lease expiration TypeHardware address/User name10.10.10.2 ecb5....
Georg It was only one line that stopped me from connecting Router(config)#no ip nat inside source lis 1 interface Vlan1 overloadDynamic mapping in use, do you want to delete all entries? [no]: yRouter(config)#ip nat inside source lis 1 interface gi8...
Hey thanks for answer! Why DHCP mask is wrong? 224 subnet is that I have 31 addresses minus broadcast and subnet which leaves me with 29 usable than I want to further assign a fraction of it for dhcp and rest leave for static which basically means dh...
