Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just for background We have a wireless network with 1560 running mobility express. I'm looked to see if i can add a spare 9120 AXP to the network as a subordinate AP. I check the software matrix and found that as the 1560 is running 8.10.151.0 i will...
We have a network of Cisco AP1562I running mobility express. I wanted to see if we can add a Cisco 9120ax to the network and run in Mobility Express as a subordinate AP. Plus keep the AP1562I as the the WLC. As the 1562I are end of sale.
i 'Im currently setting up a anyconnect vpn using multi certificate, and finding that the CRL or OCSP is not working. Im using a yubikey with the personal certificate on it and a device certificate form a laptop, both of these are signed by our own ...
Hi is there anyway that using mobility express on AP’s it would be able to route traffic to two different networks. At the moment the AP’s have a (corp) SSID and are on a 10.1.1.0/24 subnet with a default gateway of 10.1.1.1 which is the core rou...
I have a 1562i that was configured with mobility express as a WLC. I have now did a factory reset as i now want it to join as an AP to an existing network running mobility express 8.10.151.0. When i add the static ip addres to the AP and give it the ...
I had set the the ap-type to capwap. I reloaded the AP. then set the static ip address of the AP and the added the ip address and the the name of the WLC that it would talk to. and it is still doing the same. I goes through it's boot up sequence in...
Hi below is the output from the console after reboot and trying to join to the WLC. BootROM - 1.78Booting from SPI flash, Secure modeBootROM: RSA Public key verification PASSEDBootROM: CSK block signature verification PASSEDBootROM: Boot header sig...
