About rchavesm

rchavesm · 02-12-2004

Hi , I have 2 router to connect to Internet and I need to configuere GLBP, I try but doesn't work. I need to help? I send the this configuration Primary router interface FastEthernet0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto glbp...

rchavesm · 02-12-2004

Hi , I have 2 router to connect to Internet and I need to configuere GLBP, I try but doesn't work.I need to help? I send the this configuration Primary routerinterface FastEthernet0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto glbp 1...

rchavesm · 07-28-2003

Hello , I have a problem with PIX Firewall Version 6.0(1), the problem is:I have a pix with 3 interface inside,outside and dmz,ip address outside x.x.x.2 255.255.255.248ip address inside 200.115.10.10 255.255.255.0ip address dmz 192.168.6.28 255.255....

rchavesm · 12-03-2001

I have an E1 pri in the Central site and ISDN lines at the remote sites, the problem that I got at this time is that when the E1 site makes a call to the remote site, doesn't do it, but when the remote sites call to the E1 Central site there is no pr...

rchavesm · 08-04-2003

thanks all

rchavesm · 07-29-2003

Thanks you, for your answerI'm goint to take the conduit off and I will use the following ACL, do you think this will work or I have to make some changes.Can you help me?. access-list 110 permit tcp host 200.115.10.40 host x.x.x.5 eq wwwaccess-list 1...

Member Since	‎10-26-2001 10:31 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	6

User Statistics

User Activity

Problem with GLBP

How to configure GLBP

access-list problem

I have problem with E1 pri and with ISDN lines

Re: access-list problem

Re: access-list problem