We have a SPA-1XCHSTM1/OC3 installed in a SIP-200 in a 6509. There are approximately 50 T1's riding the OC3.We have two applications that fail when run from two different remote sites riding T1's that ride the OC3.Both applications involve access to ...
We are moving to a new data center and re-addressing all central hosts. Our DHCP server is currently at address 192.168.16.200 so naturally, we have a helper-address of 192.168.16.200 configured on L3 client interfaces. If possible, we would like...
When changing allowed vlans on a port-channel trunk the switch issues the following message: %EC-SP-5-CANNOT_BUNDLE2: Gi3/13 is not compatible with Po2 and will be suspended (vlan mask is different)The interface and port-channel are then down.It's no...
BTW these applications worked just fine when all the T1's terminated on 8xT1/E1 PAMs in the 7507.It was only after moving the T1's to the OC3 that two apps started failing.
We plan to get a SPA-8XCHT1/E1 to terminate the T1 not riding the OC3.At present it is terminated on a 8xT1/E1 PAM in a VIP4-80 in a 7507.Our other remote sites do not use the failing apps. There are not 48 remote sites as many have a pair of T1's c...
Can you tell me the OID you used to get the WLC profile table?I've done an snmpwalk of the entire device and cannot see the profiles names in the output.They seem to be in a hidden branch of the snmp object database.
Your assertion that changing trunk characteristics on the port-channel copies them to the members seems to be incorrect.At ieast it didn't work that way for me yesterday and today.Yesterday I set up a port-channel trunk between two 6509's consisting...