About KevinDanelleLu0013

KevinDanelleLu0013 · 09-15-2019

Boot fail, and here is the it shows upon booting up. Using driver version 4 for media type 1Xmodem file system is available.Base ethernet MAC Address: 04:31:10:3f:44:00The password-recovery mechanism is enabled.USB EHCI 1.00USB EHCI 1.00USB Console I...

KevinDanelleLu0013 · 09-20-2019

Which/what part of the switch is failing? Is it possible to narrow it down?By the way i really appreciate your help.

KevinDanelleLu0013 · 09-20-2019

Hello, since you mention those errors indicates a hardware failure, which/what part of the switch is failing?Thank you in advance

KevinDanelleLu0013 · 09-17-2019

Since it is already more than 30 days from us and no SNTC, it means this thing is = to garbage? No other way get it replace or atleast replace the defective component. Any advise would be really appreciated.

KevinDanelleLu0013 · 09-17-2019

I have encountered this issue also, and when i try booting it using flashdrive it prompts an error "that it can't see the bin file"my flashdrive is a sandisk 32GB, do i need a certain flashdrive brand with a "N" capacity(like must be 8gb lower or may...

KevinDanelleLu0013 · 09-16-2019

I was already able to type on CLI, I already added the new .bin file "c2960x-universalk9-mz.152-4.E6.bin"and boot the file but still boot fail.The error below catches my attention, and I am wondering is this another factor why it is still boot fail d...

Member Since	‎08-13-2019 08:27 PM
Date Last Visited	‎03-13-2020 02:22 AM
Posts	10

User Statistics

User Activity

WS-2960X "BOOT FAIL"

Re: WS-2960X "BOOT FAIL"

Re: Catalyst 2960 Firmware Upgrade Now in infinite restart!

Re: WS-2960X "BOOT FAIL"

Re: Ok, I've seen this before.

Re: WS-2960X "BOOT FAIL"