About Filomena

Filomena · 10-10-2021

Hi,I have one SG350X 10Gb switch trunked from its 10Gb SFP+ XG04 port to an SG350 1Gb LAN switch port (GE07)I have a SMB server running behind the SG350X in a dedicated VLAN. InterVLAN routing is done at the SG350 level.The setup is working perfectly...

Filomena · 06-01-2021

Hi, I followed the guides about IGMP snooping trying to route the DLNA traffic from one VLAN to another without successIs there any complete steps guide with an example to properly allow Multicast routing using IGMP snooping and the Multicast TV VLAN...

Filomena · 05-25-2021

Hi, After having set Management ACL rules on my switch, I enabled the DNS resolution to properly poll sntp serversHowever, I noticed theses warnings, received on a regular interval:Warning %MNGINF-W-ACL: Management ACL drop packet received on interfa...

Filomena · 05-22-2021

Hi,On the SG350, I thought I could apply some VACL or ip access-group, but these commands are not supported it seems !The only way to bind an ACL to an interface isservice-acl input# the output version is not supported it seems ! service-acl outputI ...

Filomena · 05-21-2021

Hi,I followed this video guide to enable SSH and manage the SG350 / SG350X switches using CLI with SSH login instead of the serial console. I started by only testing the user/password, not yet the certificatehttps://www.youtube.com/watch?v=AGMLyt1e3c...

Filomena · 06-16-2025

Searching for this myself, I figured it is the same as defining the default route on the L3 switch doing interVLAN routingSo, if the SG350 has the interVLAN routing disabled, the equivalent GUI of command "ip default-gateway 192.168.99.2" is:Static r...

Filomena · 06-16-2025

Searching for this myself, I figured it is the same as defining the default route on the L3 switch doing interVLAN routingSo, if the CBS350 has the interVLAN routing disabled, the equivalent GUI of command "ip default-gateway 192.168.99.2" is:Static ...

Filomena · 10-11-2021

Thank you, sure, Do you think the issue is on the SG350 or SG350X side ? Because the problem happens on all the SG350 ports and no errors appear on the SG350XA last note: I did not test the two SFP/LAN combo ports of the SG350: since the trunk is onl...

Filomena · 10-10-2021

Thank you,But as I wrote, the ports statistics showed the mentioned errors count: Internal MAC Receive Errors + Packets with ErrorsAs I also said, the errors are reported on the GE07 port. It is not related to the SMB server as I explained, and I det...

Filomena · 06-19-2021

Thank you a lotAt least now I can enable WOL accross VLANs on ym SG350Shame on the CLI manual

Member Since	‎08-17-2019 08:56 AM
Date Last Visited	‎06-16-2025 01:08 PM
Posts	52
Total Helpful Votes Received	10

User Statistics

User Activity

Internal MAC Receive Errors + Packets with Errors

SG350/SG350X: routing Multicast DLNA traffic between two VLANs

Wired akamai connections to the switch interface when DNS service is enabled - SG350

ACL to block L2 communication between hosts

SG350 / SG350X access to Management CLI using a connected host SSH client

Re: default gateway IP update using the gui

Re: Default gateway on CBS350

Re: Internal MAC Receive Errors + Packets with Errors

Re: Internal MAC Receive Errors + Packets with Errors

Re: How to enable directed broadcast on VLAN Ipv4 interface SG350x