Hi team.
Trying to transfer files from cEdge to vManage according to Cisco guidelines.Getting an error on port 830.In vManage I log in as admin to the branch I connect with the tacacs user so local admin cannot work.vManag version 20.6.4 branch versi...
Hi team,
How can i Configure an unused cEdge router interface to be "no ip address " ?
vManage does not allow leaving the "Cisco VPN Interface Ethernet" IPv4 Address/ prefix-length text box empty.
TNX
Hi,
I experience problems with RTP concurrent sessions on a C927.The problem is that druing calls one side becoms silent for 3-4 secounds and then he comes back.It can happen 2 or 3 times in a single converation.The cal doesnt fall so it is not a SIP...
Hello everyone.
Cisco 927 VDSL with pppoe configured crushes after dialer succeed.
if I diable the logical VC , router stays synchonized and alive .
when the PPPOE dialer and connects it crushes down.
=================== script section of interface...
Hi,ASR1002x running dmvpn with version asr1002x-universalk9.03.16.03.S.155-3.S3-ext.SPA.bin was upgreaded to 17.03 I used the image asr1002x-universalk9_noli.17.03.02.SPA.bin all the crypto isakmp & crypto ipsec disappeared . had to go back to asr1...
Hi, TNX for answering ,The line is purly for VoIP , Configured 50Mbit symetric and works less then 5Mbit so enough bandwidth for RTP sessions.I have packet loss But i cant find any explanation for them on C927 branch side so this is why I am looking ...
.jpg "VIP Mentor"){kind=icon}
