About lewiskeyte

lewiskeyte · 07-10-2016

Hi, I'm having a problem with call forwarding on a CME. Cleaned up config attached. Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(3)M1, RELEASE SOFTWARE (fc1) CME 10.5 Mix of SIP and SCCP phones We have a main line, 2100, th...

lewiskeyte · 07-13-2016

Have tried with this config - same behavior: voice translation-rule 3000 rule 1 // // type any national plan any isdn!voice translation-rule 3001 rule 1 /^21..$/ /8026&/ type any national plan any isdn!!voice translation-profile Outgoing_NATIONAL_TES...

lewiskeyte · 07-13-2016

Working on this - here are the debugs without this changed.

lewiskeyte · 07-13-2016

Hi, I've added an incoming dial peer but no luck. dial-peer voice 12 pots description Inbound PSTN incoming called-number . direct-inward-dial Are there any other debugs you'd like to see? One thing that is different with this setup compared to other...

lewiskeyte · 07-13-2016

Hi Ahmed, no solution yet. I will try adding an incoming dial-peer and see if that helps. As temporary fix, I've added the following rule so that calls to any DID go to the main line. All calls forward as expected with this in place, just like any c...

lewiskeyte · 07-10-2016

In fact, entering that command appears to also break calls that come in from another CME, not just the PRI line. Either way calling the main line works as expected.

Member Since	‎07-10-2016 08:16 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

Call Forwarding Issue

Have tried with this config -

Working on this - here are

Hi, I've added an incoming

Hi Ahmed, no solution yet. I

In fact, entering that