Hello! I am configuring a switch in my homelab that is connected to a Proxmox server. I have made a VLAN for the server (Vlan 200) and I have made an SVI for it with the IP address 10.137.20.1 255.255.255.0. The IP address associated with the proxmox...
Hello all,I am in the process of setting up my homelab which consists of:1. Cisco ASA 5510 (Firewall, VPN and Gateway to my home network)2. Cisco Catalyst 3570 (Core Switch within Lab)3. Proxmox Servers (Access Devices) Although I feel pretty confide...
Hello Rob, Thank you for all your help and efforts. I am able to successfully ping the 10.137.20.1 IP address (the switch SVI). The link between the switch and the proxmox server is a trunk link (as I imagine there will be multiple VLANS from differe...
Hello Rob, It seems the ping from VPN Subnet to Switch Interface is working now! Here is the Firewall Sucessfully pinging, along with the packet tracer to the 10.137.20.0 networkOAK-FWL-01# ping 10.137.10.2Type escape sequence to abort.Sending 5, 100...
Hello Rob! thanks for the reply. Apologies for not answering the EIGRP Question. I removed EIGRP from the running configuration of both devices as I decided to go with static routing as there are only two networking devices in my homelab. I have done...
Hello again, I have performed some tinkering and I have managed to gain ssh access to the ASA's management port (it was management-access mgmt) that did it for me. However, the fundamental problem still persists. I am unable to ping/access anything b...
Hello Rob,Thank you for your reply! I have implemented your suggestions and I seem tohave progressed further.As it stands, on my laptop that is within the VPN Pool 10.137.250.0 networkI am able to ping the inside interface IP on the ASA (10.137.10.1)...
