Good day!When I checked our public IP on the Censys.io site, it listed the open port on our router. Is it possible to hide port IKE 500 from the internet or exclude it from being scanned? I tried the following configuration on the device running ASA...
SG200-50 fw: 1.4.9.4 I am currently monitoring the interface utilization of a certain server down to client PC.The network connection looks like this.Server ----- Server Sw ---- Core Sw ---- Distri Switch ---- Access Sw -- Client PC Issue:The Tx/Rx U...
# im sorry for my english... im trying to make it clear as possibleSETUP:servers = 10.112.140.0/24vlan102 = 10.112.145.0/24vlan103 = 10.112.150.0/24vlan104 = 10.112.155.0/24interface 0/1 = assigned to 10.112.140.0 network block.c3560 = 10.112.140.3/2...
@MHM Cisco World May I know if the config below aligns with what you were suggesting?access-list ALLOW_IKE extended permit udp object Azure-IP object Corp-IP eq 500access-list ALLOW_IKE extended permit udp object Corp-IP object Azure-IP eq 500access-...
Thanks for the suggestion @MHM Cisco World .Im not familiar with ASA but i will check how to use and configure ACL control-plane. I'll let you know of the result.
Hi Mike, Thanks for stopping by. I already checked and perform the following:Port settings: duplexUTP cable : <50mSwap port: yes What I will do next is to try to upgrade its firmware to the latest version.I was not considering this at first because a...
