Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Have anyone tried setting up a guest portal FQDN mapped into two different IP address in which these two IP address corresponds to the IP address of PSN nodes?
Let's say for example
PSN1: 1.1.1.1
HOSTNAME: psn1ise.company.com
PSN2: 1.1.1...
Hi,As we all know, capwap tunnel is built from lightweight AP to WLC on a Unified WLAN. What are your thoughts when you disable the mac learning on the switch example on the management VLAN of AP?
TIA!
Jan
Hi,Anyone who have encountered this bug?
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvc67005/?referring_site=bugquickviewredir
Already upgraded the controller to 8.2.161.0 but bug is still there.. any recommended IOS version where this bug is re...
Hi,
Does Cisco WLC have an option to configure an XML API Server or equivalent command in CLI just to configure an XML API Server? I could not find any related documentations.
Thanks!
Hi guys,
I am just wondering, no client is connected on 5GHz and yet there is a very high channel utilization with 0% interference. Do you know how is that possible? no problem on 2.4GHz. Im using Cisco WLC 5520 and firmware version 8.2. Is this som...
Hi Scott,
No such use cases present, I am just wondering what would be the effect on that procedure on the CAPWAP APs, will it benefit the switch by gaining less CPU utilization since MAC addresses of clients are not learned by the switch itself rath...
On our case we hit this bugCSCve57121 ( https://bst.cloudapps.cisco.com/bugsearch/bug/CSCve57121/?reffering_site=dumpcr ) and TAC recommended us to upgrade to 8.3.133.0 MR. So far no more disconnections experienced by user.
HTH,
Jan
Hi Scott,
what firmware were you using on your WLC?
Also encountered this issue, users are complaining because they don't want to connect and disconnect to the SSID once they are dropped. Temporary fix is changing the 2802i AP to 2600/3700 AP.
JE
Thanks Leo, Salamat ng marami
Indeed TAC has recommended that, herewith below is his email:
"After checking on my I found that we had a bug with same symptoms (now it’s closed since the issue is not reproducible on the latest 8.2 release) https://...
Hi All,
As confirmed with TAC, it is indeed a bug issue. See link: https://tools.cisco.com/bugsearch/bug/CSCuy97681/
Recommended action is to upgrade the WLC to the following 8.2.130.0.
https://www.cisco.com/c/en/us/support/docs/wireless/wireless-la...
