Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am sure this is an easy answer but I can't really find an explanation anywhere. We have 2 SG550x-42mp in stack mode as a ring. They are up and running and all is well. I have ports 1-48 on both switches in access mode (VLAN 2) and 49-50 in trunk mo...
I am working to move all devices on our network off of the default VLAN (VLAN 1). This address space is 192.168.0.0/xxI am using a variety of Cisco SG300\350\500 switches in Layer 2 mode. All switches still have VLAN 1 as native All switches ...
I have several Layer 2 small business switches hosting several VLAN's. All routing is done on our firewall. With the exception of a few phones, all other VLAN's are working as they should. All end point, switch ports, are set up as Access ports, and ...
In my lab, I have 2 Cisco SG350-10 switches connected to a Palo Alto 220 firewall. On my switches, I want to do layer 2 switching and routing on the firewall. Here is my setup: SG350-10 switch #1ports 1-3 VLAN2 set as access portsports 4-6 VLAN4 set ...
I am setting up a Cisco LAB (to closely mirror our production) with a 2 catalyst 2960's, 1 3750, and 1 SG350-52. I have set all 4 up for inter VLAN routing and it seems to be working well for the most part. In my test LAB, here is what I have:VLAN1 1...
I am sorry but this does not help. I have read the guides and DHCP is working just fine on the default VLAN (VLAN 1). I need to get it to work with my DHCP server(s) on on VLAN 4. DHCP relay is enabled on all switches and all switches have my DHCP se...
I apologize for the extremely late reply. I replied before but apparently it did not submit.It seems my issue was an incorrect gateway on my clients on VLAN 1. Once I corrected it, all traffic on VLAN 1 started to flow as it should. Reza gave me a pu...
