About Rod Schnell

Rod Schnell · 04-14-2017

Our loyal RVS4000 has finally reached its limits and needs to be replaced. Having little knowledge and experience with 2600 series routers and the company already owning a 1900 series router I have been trying to setup the 1900 to mimic and expand o...

Rod Schnell · 10-24-2012

Good day all,The setup: Using this setup I can pass VLAN 1 and 5 traffic. VLAN 1 can ping each of the switches with the command "pin 10.1.30.44 -t -l 1500" or similar. If I try the ping on the VLAN 5 side of things the max size I can get through is...

Rod Schnell · 04-14-2017

Thanks Jon that fixed it. I had tried that before without the RIP section and it didn't work. I pulled the POOL section from here: http://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/13772-12.html#topic5 SMH Something so simp...

Rod Schnell · 10-26-2012

HP Switches are HP 2610-24 J085A, so whilst brand new outta the box I'm gonna say "fairly new".I have an IOS 12.3 (??) and it does give me the ability to create sub-interfaces and such. Can't bridge those beacuse then VLAN1 sees VLAN5 and the other ...

Rod Schnell · 10-25-2012

I understand all of that and it makes sense. The question is how? I know I can use mtu=xxxx (1522) on the BVI and on the S0/0 but that doesn't seem to have any effect. Am I missing something somewhere in the configs or are the 2600's not capable?

Member Since	‎02-20-2012 12:24 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

Migrating from Cisco/Linksys RVS 4000 to Cisco 1941/K9 IOS 15.0(1)M2

2600s, VLANs, and MTU size

Thanks Jon that fixed it.

2600s, VLANs, and MTU size

2600s, VLANs, and MTU size