Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm facing the same issue, my PI 2.1 can't discover any devices outside the local server VLAN(even can't manully add the devices) , I can ssh to the network devices within the same PI VLAN but I couldn't ssh outside the PI VLAN, it is not a routing o...
You have to use L3 routed port to configure the keepalive ports, however, this requires having L3 license and L3 module on N5k otherwise; the only possible option is to use the mgmt 0 port, the below copied from Cisco Nexus 5000 NX-OS Layer 2 switchi...
Hi Alukes,I'm planning to have a similar setup “VSS with MPLS/VPLS using Sup2T and WS-X69xx/WS-X68xx line cards” for green field deployment, however; I don’t have a time to PoC the proposed solution, I’d appreciate if you share any limitations/restri...
