Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have Cisco ISE 2.3 and the router has IOS . I am using TACACS+ function on ISE Am try put unknown users in ISE(Network Access Users) with blank password(by enter)
we found the return message is "Enter Old Password:" on the router.
what I doing...
Hi all,
Can someone tell me what the meaning for the log as below?
%IPFIB-SLOT10-4-CLP_FIB_TCAM_PF_INSERT_FAIL: FIB TCAM prefix insertion failed for IPV6 unicast on instance 10
%IPFIB-SLOT10-4-CLP_FIB_TCAM_PF_INSERT_FAIL: FIB TCAM prefix insertion ...
Hi,
i am trying to disable port tcp 830 ssh server on cisco Nexus 3172 currently My NXOS: version 7.0(3)I5(1) and i am trying with ACL it did't work and i think NETCONF on nexus3172 is enable by default ?
show sockets connection
Active connectio...
hi all,
I've just started using ASR9K with IOS-XR v.6 software at previously we used the Cisco 7600.and we use the RMON function on Cisco 7600 IOS but after we changed we did not find it on XR.
What can I do on XR?
thanks in advance.
MJ.
Hello Expert,
i have plan to install a new node in platform Nexus but i have concerned about head-of-line blocking problem , Qos and Function(not aci mode)
am confuse between VOQ and EoQ What the difference ? and Why Nexus 9500 without VoQ.
I would ...
hi ,qsfp40g break to 4x10g lr via mpo cable with cmd: interface breakout module 1 port xxxx map 10g-4xon nx mode is ok for me.here is an example port 10G break.Eth1/18/1 eth 10GEth1/18/2 eth 10GEth1/18/3 eth 10GEth1/18/4 eth 10G
Dear Alexander,
Very good information
1. I have some questions.
For VoQ with control plan traffic such as BFD protocol , OSPF protocol in this case how to manage it.
2. It did help a lot in clarifying my confusions.
Ola, traffic that the RP or LC i...
Hi Georg,i have already do as belowbut can't block tcp port 830
sh ip access-lists acl_internet_in
IP access list acl_internet_instatistics per-entry 10 deny tcp any ip/32 eq 830 [match=12] 11 deny tcp ip/32 eq 830 any [match=0] 10000 permit ip any a...
Hi Georg,i have already do as belowbut can't block tcp port 830
sh ip access-lists acl_internet_in
IP access list acl_internet_in statistics per-entry 10 deny tcp any ip/32 eq 830 [match=12] 11 deny tcp ip/32 eq 830 any [match=0] 10000 permit ip an...
