Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i am able to connect via anyconnect client and get an ip address, but i am not able to access my administration (inside) network
administration = 10.18.1.120
vpn pool = 172.16.10.0 /28
outside 10.17.13.120
this is my config
ASA Version 8.6(1)2 !!in...
i do not know where i am going wrong here. i am only able to ping 10.18.1.120 (internal gateway) and 10.18.4.121 (inside host). im not able to ping other workstations. below is my current config
: Saved: Written by enable_15 at 09:07:39.788 UTC Tue...
i am able to ping 10.18.1.120 from my remote machine.
after adding the packet-tracer input command, this is my output
admin-firewall(config)# packet-tracer input administration icmp 10.18.1.121 8 $
Phase: 1Type: ACCESS-LISTSubtype: Result: ALLOWCo...
admin-firewall(config)# sh route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF externa...
