We are running an IPSEC tunnel with single DES between PIX 525 and 520. Remote site reported slow newwork performance when they access resources at the main site. Main site has a DS3 and remote site has 4 T1. Right now MTU size on all interfaces ...
Hello,I would like to implement multicasting on my network. I've been reading white papers of the Cisco's website. Now I am a little confused with all that information. I've got two 5505s with RSMs at the core and then mixture of routers and switc...
HelloI have a design question. I have two 5505 with RSM in each that are connected to each other with 200Mb trunk. Right now RSM of the first switch is in VLAN 1; RSM of the second switch is in the VLAN 2. Altogether I have about 20 VLANs. I am ...
We've been looking into purchasing an IDS box for our network. Currently we have a Norton Antivirus server running on a network that pushes updates and scans our e-mail servers and filers. What would be an adventage of purchasing an IDS? I would li...
How can I check CPU utilization on 5505, not the RSM module but the switch side of it? I am running ver. 4.5. I am sorry I could not find it on Cisco's web site.Thanks,
1. How do I find out which one is the root bridge? 2. Standby ip address is that an address for the RSM module of the other 5505 or is it a virtual ip address and both RSM should point to it?Thanks a lot,