Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
we have a site-to-site IPSec tunnel between ASA5510 in our datacenter and ASA5510 a customer's datacenter. the tunnel was been up for years without any issue. There is another firewall at the customer's premises in front of the ASA5510. recently, th...
I have two asa 5510 configured for active/standby failover. they are configured properly and there is no error in the log.When i test the failover by shuting down the primary, the standby unit detects it and takes over as a primary role.everything I ...
ssh was working perfectly for one year on ASA 5510 (ASA 8.12) until it was recently upgraded to ASA 8.21. When i try to connect via putty, i get'Network error: Software caused connection abort'I regenerated RSA key to no avail. Please advise. thanks
We have two vlans. VLAN10 - 192.168.0.0/24 and VLAN 11 - 192.168.11.0/24. Using IP helper-address, we have one dhcp server sitting on VLAN 10 and it works find when you plug a new computer into any network. The problem occurs when we move one machin...
thank you so much for your help Jorge. "From your description RA VPN users connect ok and I do assume they get 10.10.11.0 addresses from vpn pool, you also indicate they can have access to all of 10.10.10.0 net resources in inside LAN is this correct...
