Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have several 871 routers running IOS version c870-advipservicesk9-mz.124-9.T1.binThey have been running great for a long time but recently they all started dropping packets while downloading items from any website. For example Symantec Liveu...
Hi,I am working on a 877 router and want to know if its possible to seperate two VLAN's from one another?Consider the following scenario.WAN: Static IP a.b.c.dVLAN1: 10.10.10.x networkVLAN2: 192.168.2.x networkDefault Gateway for both VLAN is the sta...
Hi,I have a few Cisco 831's that I am trying to upgrade the memory on. Most of them have the ROMMON version 12.2(11r)YV3. I have no issues upgrading the memory on these models.Then there are some with ROMMON version 12.2(8r)YN which is giving me nigh...
Hi,I have a new Cisco 871 router which I modeled after my original Cisco 831's. I have the http application security turned on the 871 router and what is happening is that most of yahoo sites are not coming up. When going to http://www.yahoo.com or m...
Hi,I have a Cisco 871 Router and I have it configured with the following IP range.Cisco IP: 10.10.10.1Subnet: 255.255.255.248Gateway: 10.10.10.1The Clients use this settingsIP: 10.10.10.2 thru 10.10.10.6GW: 10.10.10.1I have a Wireless router whose WA...
Is there anyone who knows what is happening? This issue is happening on other sites as well like webmd.com and weather.com for example. And every time this happens errors similar to the ones listed below are being logged.Errors ----------------------...
intelide3Yes my router is setup to use NAT and though I am understanding most of what you are saying I am still looking for a viable option even if that means I have to get away from NAT and go to Routing.Basically 192.x.x.x network should only be ab...
@intelide3I can do that but I also should mention that I do want 192.168.0.0 network to be able to access the WAN (through the 10. network).@uubozou11I am trying to do this with ACL but apparently I am not entering the correct settings.I have thisacc...
