Hi All - What I'm trying to do is connect my home internet (5GB symmetrical with a /29 static IP block) to the 10GB ports on my 3750x. I have both modules in and ports are up but I cannot get internet access through connected devices.Here is a rough...
Hi All! I recently purchased a Cisco 3750x from ebay to replace my dead Cisco 2960G switch. After resetting the switch to factory default settings and some basic configuration, I'm only able to receive no more than 300/300 with a 1000/1000 AT&T Fib...
Newbie question here guys, appreciate your patience.
So I'm trying to use a Cisco 3825 (Router0) router with a ASYNC 16-NM module w/ octal cable for my terminal server. I've read through the document located here:
http://www.cisco.com/c/en/us/suppo...
Hello Everyone -
I have 2 issues here which I'm hoping is an easy fix and I'm simply overlooking the basics.
Issue #1 - Cannot ping from switch1 to router1 and vice-versa.
Issue #2 - Cannot gain internet access from PC connected to switch1. (They ca...
Hello All -
First off I want to say thank you to everyone helping out, this is a great community from what I've seen thus far. All my google searches bring me here :)
So I built my lab, trying to study for my CCNA and for some reason, perhaps I'm...
I hard coded interface gi1/0/5 to 1000/full and still no change. Even upgraded the iOS from c3750e-universalk9-mz.152-2.E5a to c3750e-universalk9-mz.152-4.E9. Still nothing...
Georg -
I added those and I still cannot receive the same error. I changed the loopback IP to a 172. and all of my ip hosts are configured as such.
Router0#router1Trying Router1 (172.10.1.1, 2001)...% Connection refused by remote host