Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,My network used to be one flat network. I implemented vlan into the environment, and now my VPN users no longer be able to access any network resources when they are connected. Please advice as what do I need to get my VPN users to access the n...
My network used to be one vlan (vlan1). All devices on the network to point to my PIX as the default gateway to the Internet. Since, I vlan-ed the network into multiple vlans using the ip routing feature on the 3550, I cannot access the Internet. I...
Currently, I have a static mapping of my public mail ip address to my Exchange server on the inside of the ASA 5510 using the statement below: access-list outside extended permit tcp any host 69.3.216.x eq smtp static (inside, outside) 69.3.2...
What's wrong or missing from the configuration below? No internet access. On the ASA, I can ping my T1 router:T1 router - 69.X.X.193Outside interface 69.X.X.196Inside interface 10.10.1.254asa5510(config)# show run: Saved:ASA Version 8.0(2)!hostname a...
Hi, I have configured two PIX 506 to do site-to-site VPN. I have attempted to test the PIX intended for the branch office at my home ADSL access from SBC. I cannot get out to the internet with the branch PIX in place. Is there any potocol/port need ...
When the VPN client connect, they lose internet connection. By desgin, we chose not to have the user to have internet when they're online via VPN.Did the crypto isakmp nat-t and sh cry ipse sa. On the VPN client connected, I ping 192.168.101.254, I d...
Hmm, made the change as you suggested. No go. As for the Secured Route under the VPN Client Statics, I don't see any my local network. Under the Network is 0.0.0.0, under Subnet Mask is 0.0.0.0.I may have to revert my network back to one flat network...
Hey Federico, I did change the VPN client ip pool to a none-overlapping subnet. I change it to 192.168.10.210-192.168.10.220 and test. Still no go. Anything other suggestions will be appreciated
