Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a VPN between a 3005 and a 831-router.Several times/hour the traffic flow halts some seconds over the VPN, and the log in the VPN3005 shows the entry added bellow. Doing different debugs in the 831-router doesnt show anything. The tunnel stays...
I have a VPN between two IOS-routers there one of them gets it's address dynamicly from the ISP. Now I also want to use VPN3000-clients to connect to the router with the static address. Is this possible? Can I have double dynamic maps? Is there any c...
Is it possible to run VPN both from an IOS-router with dynamic public address and VPN3000-clients at the same time to a central IOS-router with static public address. Does this mean that there must be double dynamic crypto maps in the central router?...
I dont get a tunnel to pass traffic between a VPN3005 and a 806-router. The router runs over ADSL and get its public address through DHCP. The tunnel is established and the router encrypts packets and sends them to the VPN-concentrator, but the repli...
Hi,Is it possible to use an IAS installed on a NT4 PDC/BDC to authenticate VPN3000-clients connecting to a PIX515? It seems not to work using "domain\username" in the VPN-client?Or do I need to install the IAS on a standalone-server and use local use...
I exchanged the VPN3005 with a 831-router, so now it's a VPN between two 831's.The problem is still there and the log of the new 831 tells the following:--Log entry--Apr 29 11:24:16.130: %HIFN79XX-1-ERROR: chifn79xx_crypto_callback() toolkit return f...
1 There are different 24-bit subnets from 10.x..x.0 behind the 3005 and 806.2 I've tried other subnets e.g 172.16.x.0 with the same results...It doesnt matter which address I assign to the client - the concentrator still route all packets out to the ...
I've done some more investigations and I can see that the VPN3005 is actually sending the "client-replies" out to the 806-router instead to the client. So it is the routing in the VPN3000 that is not working when both the 806-VPN and the client-VPN i...
