Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I download Cisco Prime Express 2.1 from www.cisco/go/prime-demo the trail version . the file saved as zip file. when i try to open or extract , it didn't open and show this massage :Cannot open file ; it does not appear to be a valid archive....
Hi all,i have two wireless networks with two subnet (see the attached drawing) , all controllers run v4.2 access points type is 1020 .the first network in hall 1 have 4 wlc in subnet 172.16.40.X , the security is WEP key for wireless phonethe second...
Hi all ,i have two WLC ,the first one is internal wlc and the second is Guest WlC connected to DMZ switch with NAC Guest and firewallThe wireless Guest network had some issue, the end user cannot reach to login page but he got IP address and the cont...
HiI configured wireless Controller 4402 and 1250 s access points with EAP-PEAP authentication ,(ACS v5) patch 8 installed The problem is the wireless clients disconnected and re authenticated so the costumer not accepted this issue Please advice
dear allthe authentication and connecting to the network is Ok the main problem is mapped drives.the clients using XP what i understood is must enable machine authentication in ACS ?? please advice
thanksI know this ,but my question if use different subnet and one SSIDcontroller 1 ------SSID=WARDA subnet =192.168.100.100/24controller 2 ------SSID=WARDA subnet =192.168.200.100/24And all controllers on one Mobility group the roaming for data and ...
