Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!I am trying to implement a PPS limit for every user connected via PPPOE to one ASR 1002-HX box.Turns out that recently, due to the rise of the DDOS attacks, we are seeing a lot of customers that has compromised IoT devices and from time to time...
Hello guys - my first post here, please bear with me.
I am using an ASR 1004 with RP2 and ESP10.
That's the first time that I am trying to configure a BBA-group to work with CGNAT.
After some days, I realized that I do need the overload after the nat...
Hello, I'm facing a problem here and spent the weekend reading this forum. This is my first post.The facility have 25 APs on a open floor. They use Handheld computers - no notebooks - no voice.They used to have RRM enabled. After reading a lot of thr...
22k usersCGN and BPA in place.There is nothing wrong, the problem is with these botnets nowadays there are a lot of IoT devices that will start sending a lot of pps to random destinations... that will cause the QFP load to reach 100%, and degrade the...
by applying the limit on the entire VLAN I am afraid of somehow dropping small DNS queries that would fall on the 64-256 packet range...That's why I think I will go with a per user policy... that way, only the user will be impacted when the flood occ...
to add some complexity or clarity to this, I just tested with one windows 10 machine and it works.
So, TPLINK router is OK, windows 10 is OK.
Windows 8 does not work.. how can the SO influence on the port allocation?
I tried to change all the possib...
Hi Georg, here is is..
Another weird situation here.. I was testing all the time with my windows box, dialing onto the ASR.
Now, I've tested with one old TPLINK router, and, everything works fine.... not sure why.
When I try the windows box again, st...
