Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have firewall 5505 where I have created site to site VPN. First time I have created crypto policy with group 2 and then changed to below.
Phase 1 failure: Mismatched attribute types for class Group Description: Rcv'd: Group 5 Cfg'd: Group 2Group ...
We have Nex6K build as dual home. Spanning tree running on it as PVST+. These are new Nexus6k when we try to add in our production network , where Layer2 portion of network is all Netgear switches Model M5300-52GS3 and M4100 POE, Network goes down ...
I have two routers that is connected to two different service provider which can access via telnet however can not be accessed via SSH.
ine vty 0 4 access-class 23 in vrf-also privilege level 15 transport input telnet sshline vty 5 15 access-class ...
Router6#show interfaces tunnel 1Tunnel1 is up, line protocol is down Hardware is Tunnel Internet address is 192.168.204.6/30 MTU 17940 bytes, BW 100 Kbit/sec, DLY 50000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation TUNNEL, loo...
Router6#show interfaces tunnel 1Tunnel1 is up, line protocol is down Hardware is Tunnel Internet address is 192.168.204.6/30 MTU 17940 bytes, BW 100 Kbit/sec, DLY 50000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation TUNNEL, loo...
Hi, Jawad
I have same error showing on firewall 5505, however I can ping to remote end peer from server. I see site to site vpn session as well. How can I get this error resolved.
Phase 1 (Main mode)
Lifetime: 86400s (1 day)
Encryption: AES256
Hash...
We have our colo site with netgear network and I am not sure if our remote site needs to have all VLANs added on MST0 ?
Should same VLANs that are learning route via layer 3 to main office and visa versa all can be put on MST0 at main office or sho...
Furose
Hi, we have only 20 VLANs, If I put all VLANs to MST0 on Cisco side as well as on Netgear side, would it cause any issue? I create MST instance for VLANs, only MST0 read BPDU. Keeping all the VLANs in MST0 is working to get Negear as root swi...
So if we have all the VLANs in default MST0 instance, that communicate to another MST0 switch that is Netgear topology, would it cause any design or architect issue ?
Furose
Hi, Netgear switches has to act as root switch. we can not has Nexus 6K as Master. Changing priority or making in root secondary is not going to help. Any Idea what else should I try?
Thanks
Shraddha
