Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a variant server which is used in oncology and radiology department of my hospital. I have a strange problem that after they work for an hour there is packet drop and there work is lost and they have to do from starting as it is real time w...
Hi,I have 2 problem in IPS-4255-K9. my network has 2 device of IPS-4255-K9 and each have different problemProblem no 1:My IPS-4255-K9 after running for 1 hour or less than that starts to hang and all the traffic is blocked as it is inline mode.Probl...
Actually one of the switch stack was down in the 3 stack switch. So i remove the switch and assign a diff ip to that sw but still the link is red even after refersh and topology update
In the Stack Switch message in member Stack in booting time is that reloading because of master reload always but master is running smoothly and not giving the switch detail of member
the first problem has been resolved by changing the IPSRegarding the second problem still we are facing the same old problem, we have already checked the network security health, we cannot see any threshold activity like red, yellow or green.Note : w...
The model at the server end is 6506 and the model at the client end is 3750G48PS-S. The packet capturing still i have not done infact i have never done it before. There are many server connected to this data center switch(6500). Can u please provide ...
For the log, the system says that if not giving any specific problem. Should i reload the switch, will this help me and on doing extended ping with server ip address with the size of 10000 its failing, but with less its pinging fine.Nehal
Hi Ganesh,We are using fwsm in 6500.today i connected my server to my distribution switch and the client are connected directly to the access switch who can access the server without fwsm in the middle but still the problem exist.Nehal
