Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiIve been trouble shooting some network problems and Ive noticed something strange. We have 2 6500s as the core of our network both have interfaces on vlan 1. When i ping one 6500 say "6500_A" the replies come back with a TTL of 59. But if I ping th...
HiIve built a new workstation for myself (win xp + sp 2 + patches). Unfortuanetly when I try to access our ciscoworks server, it installs the java plugin but then chrashes when I try to get into the ciscoworks proper (beyond the login screen).Ciscowo...
HiWe are testing Webvpn for our users. When they get logged in they get a list of shares they can access. Recently one of the servers has been rebuilt with win2003 and from that (or so it would appear to me!) point webvpn users cant access their shar...
HiHas any one used or is using webvpn in terms of a PKI. We have been using webvpn on a limited scale using the self signed certicate and it works ok. But users get asked to install the certificate and then ok the certificate due to the name being in...
HiI recently upgraded my PIX from 6.1.4 to 6.3.3. Ever since then Ive been getting these messages:- %PIX-3-106011: Deny inbound (No xlate) tcp src inside:192.168.0.112/721 dst inside:192.168.1.1/515The bizzare thing is that the 2 hosts are on the pri...
HiYes it is the vlan 1 interface. The 6500s are operating in hybrid mode. If I go into the msfc on the 6500s it shows that vlan 1 is directly connected. Their is an extra route for a vpn tunnel thats on the one of the 6500s (6506_A).I have done a com...
I posted the message then found the problems, no wins servers on the server network settings. It looks like the webvpn service needs this to work and cant use DNS. Is this correct? A capture of webvpn cifs traffic came up as being Samba traffic, is t...
Hifixed it. The server was a NT print server with a secondary gateway enabled. The secondary gateway was the pix inside interface. Ive removed the pix as a 2nd default gate And the messages no longer appear.
HiThanks for the links.Ive see the white paper about netflow performance analysis before. It only seems to deal with routers. I would like to enable NFDE on our 6500s running catOS, will it have a similar affect?thanksNorman
