Hi, I am busy developing a device package for DNAC and am experiencing issues with adding topology links between two non-Cisco devices. How do I collect logs on DNAC to troubleshoot this, and which logs will be best to collect?
Hi guys,I hope someone can help. I have a sip trunk from cucm 9.1 to a 3rd party PBX vendor. Calls between the CUCM and PBX works well, but if the PBX tries to transfer the an "internal PBX call" to me. I get no speach.If you look at the CUCM trac...
Hi,I hope someone can help me. I have a CME 9.1 with 3905 (SIP) phones registering to it as well as 6941's (SCCP). My 6941 phones can call each other, the 6941's can also call the 3905, BUT, the 3905 can't call anything. As soon as I dial any num...
Hi,I have a GW that connects to CUCM via a SIP trunk. This GW converts TDM to IP. Clients dial into the GW, and the GW forward the call to CUCM and then CUCM to a phone. My challange is that some outside callers hide their CLID, and I need to disp...
The issue I am experiencing is that the topology link does not show up when I view the topology map. No Fabric, this is only for monitoring at the moment. HP Switches
I have determined that there is not enough bandwidth available to the gateway location. This is so strange since my phone and the Gateway is in exactly the same location. Also when the call comes into the phone (before answering the call) the cellp...
Hi Eric,I think you misunderstood me. The problem is I can't phone S1 numbers anymore by using their local extensions (ie. 5000) from the HQ cluster. I have to dial their E.164 number in order to reroute via the PSTN. I want to know if there is no...
