About elyesfayache

elyesfayache · 08-26-2011

Hello everybody,When trying to fetch vlan via RME on 4948 switches, LMS fail with the error message : "Command Failed TELNET: Failed to establish connection to 10.100.254.31 - Cause: connect timeout VLAN Config Fetch is not supported using TFTP".We o...

elyesfayache · 11-20-2009

Hello everybody,I have to configure a site to site VPN with dynamic IP on both end: I have a Pixv7 in the central site and a router with Firewall Software on another site.Is it possible to do so with using dns names?

elyesfayache · 04-20-2006

Hi,I 've searched throught the entire site and didn t find anything about IPSEC support by the 7304-NSE100 router.Can someone answer me if yes or no 7304 NSE-100 can support IPSEC VPN?Thanks in advance.Regards,Elyes FAYACHE

elyesfayache · 09-03-2011

Hello Gaganjeet,Thank you for the hint about the debug command.When checking the debug I found that command have been passed correctly to the switch. But I remembered that the switch is vrf aware and no route to LMS from the main routing table.So we ...

elyesfayache · 08-26-2011

Hello Gaganjeet,Please find attached the requested file.Regards

elyesfayache · 08-26-2011

Hello Gaganjeet,Actually there is no nat on the network and yes, when applying the command copy cat4000_flash:vlan.dat tftp: and pointing to the tftp server it puts it correctly.I try to get rid of this additional cat4000_flash:vlan.dat in the comman...

elyesfayache · 11-20-2009

Thank you very much paul I will try this between 2 routeurs and let you know

Member Since	‎04-20-2006 01:49 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

LMS 3.2: VLAN Fetch issue. Wrong command send to switch

Site to site vpn with dynamic IP on both site

"7304 NSE-100" router and IPSEC VPN

LMS 3.2: VLAN Fetch issue. Wrong command send to switch

Re: LMS 3.2: VLAN Fetch issue. Wrong command send to switch

LMS 3.2: VLAN Fetch issue. Wrong command send to switch

Re: Site to site vpn with dynamic IP on both site