Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 2 routers (3925) connect to the ISP through individual DS3 (T3) Connection. I want to ensure redundancy and proper load balancing. Sample configs and recommendations would be appreciated.
While telneted I implemented port security on a 6513 module with the following command:set port security 6/1-48 enable age 2 maximum 4 shutdown 0 unicast-flood enable violation restrict timer-type absoluteI noticed an immediate delay (slowness) on th...
hi,I configured 2 routers with the following multilink configuration:Router # 1interface Multilink1description Multilink connection to ####ip address 10.82.163.1 255.255.255.252 ip unnumbered FastEthernet0/1 ip accounting output-packets ip authentica...
Hi all,I have 2 2811 routers with 4 T1 lines connecting them, I would like to use multilink. I have a few questions before I get started:1. will there be downtime when I switch to multilink? or will traffic continue to pass thru?2. Is creating a t...
I will be installing two 2811 routers with four dedicated (point-to-point) T1 connections.Is it better (faster) to use Multilink PPP, IP CEF, or can I use a combination of both?
I am able to ping from one router to the other router (FastEthernet interfaces) however I can not go past that (reach servers, etc...) on the other side.
currently we use "ip authenication" for eigrp at the serial interface, shoul I apply that to the multilink interface or keep it at the serial interface?
currently only 1 serial interface is active, we will soon be getting 3 additional T1 lines. In my configuration I just added the multilink commands to the interfaces.Also, are you saying that I should remove ip unnumbered and ip accounting from the ...
Thanks for your response.I have created the following configs: can you or anyone else see anything there that might give me problems when i apply it?config of router A:interface Multilink1ip address 10.82.163.2 255.255.255.252ppp multilinkppp multili...
