Hi,on PC2(that is connected to Switch0 Fa0/22 that is in VLAN 3) has IP address 192.168.1.3 with a subnet mask 255.255.255.0.PC1(is in VLAN2) has IP address 192.168.1.1 with a subnet mask 255.255.255.0.The different VLAN needs to have different IP su...

Hi, this is probably not an issue anymore, but I checked out your .pkt file. I did show ip route on R3 and did not find the 192.168.10.0 network in it. The issue seems to be that this command is not in R3 ip route 192.168.10.0 255.255.255.0 200.0.1.1...

Hi, I found it on a Cisco site. https://software.cisco.com/download/release.html?mdfid=268437990&flowid=16255&dvdid=280594152&softwareid=280805680&release=12.2.33-SRE14&relind=AVAILABLE&rellifecycle=MD&reltype=latest I myself do not have access to i...

Hi, is IPv6 enabled globally on the Switch? Can you run show sdm prefer and share the result?

Hi, I would be careful about redistributing BGP routes to OSPF as you could overwhelm the OSPF routers with all the routes. Are you redistibuting all BGP routes into OSPF or just some of them?