Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,
I have ASA failover bundle for one of the project and need one clarification about reverse route.
1. Before ASA i have a L3 3560 installed where three L3 vlan's are created. each SVI have following IP's.
SVI1 : 192.168.1.1
SVI2:19...
Hi ,
I have a cisco PIX 5525 Firewall with 6.3 (5) IOS and 3.0 Device Manager. Now i have to upgrade the IOS to 7.2.
Tried through TFTP but getting error saying tftp:couldn't open. Tftp ip is pinging from PIX.
Let me know if we can use TFTP with t...
Hi Team,
I have one ISP link terminated in switch. Switch model is WS-C3560G-24PS.
interface GigabitEthernet0/24 no switchport ip address 127.1.1.1238 255.255.255.252 Changed the IP.
Default Route to
ip route 0.0.0.0 0.0.0.0 127.1.1.237.
Network ...
Hi Team,
I have three 3750 switches one is of 48 port and other two are 24 port. These three switches are connected in stack.
Master switch is : switch A with 24 port.
We have up link connected to master switch.
Client physical connectivity is fro...
Hi Team,
We have syslog server configured on linux . We have pointed all the network devices logs to that server.
I have a challenge with one of my router. In show logging it shows these many lines are logged but in syslog i don't see any entry for t...
Hi Mark,
yes, I could see logs in buffer.
I tired by enabling logging trap debugging and did debug few services but no result.
i couldn't see any entry still in syslog.
