Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IntroductionFeature EnablementMirroring explainedConfiguration & VerificationLimitations
Introduction
Prior to Cisco IOS XR Software Release 7.1.2, XR dual RP devices did not support file mirroring from active RP to standby RP. Administrators had ...
IntroductionGolden ISO(GISO)GISO imageBuild a GISOSample executionVerify the content of GISOCreating an USB bootable fileUSB boot in actionQ & A
Introduction
This document helps to boot NCS5500 series router through USB devices. This very useful...
1. Description:2. Summary3. Detailed steps using pyang to derive the path4. Construct sensor path and validate data model
1. Description:
This document describes about how to derive yang path from a yang module. It’s challenging to get the senso...
IntroductionSNMP Vs TelemetryUse casesConfigurationVerificationTelemetry Debugging:Setting up the collector (pipeline client)Configure PipelinePipeline executionPipeline execution on mac using docker
Introduction
The objective of this documen...
Monitoring NP load utilization
Many times you want to know the load of the npu and this functionality enables you to verify NP utilization or NP performance load. This helps you to perform load balancing based on NP utilization. To address this a ...
Hi Wojciech,Sure, Can you please share your command used to generate GISO and show install active summary after boot up?You can mount your iso with loop option and check if configs and rpms are part of the iso.Sample as mentioned in the doc.[root@nb...
Hi Andre, sorry somehow missed your comment, yeah it would show up something like below
RP/0/RP0/CPU0:OC-PF#show version Wed May 22 04:26:36.457 UTCCisco IOS XR Software, Version 6.5.3Copyright (c) 2013-2019 by Cisco Systems, Inc.
Build Information...
I see pretty much all packages in show install active. So just removing 3 packages unblocked you from install ?
What was there in show install inactive?
Yes Maria, you can run via mac using docker. We have docker file:
https://github.com/cisco/bigmuddy-network-telemetry-pipeline/tree/master/docker
Let me know if you have any questions.
Regards,
Venkat Nagarajan
