Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys
is there IPsec limit for ASA 5510 ?
there is user complain upon connected they cant access any server in the local network. but currently it is working fine
Hi Guys
Not sure if my information provided is sufficient. I met some problem trying to communicate between 2 vlan. Please assist to see if any config required is missing. thank you.
switch 4948 cannot communicate with vlan10
i have enable ip ro...
yes i did googled and found that its limit is 250. i am not sure what caused user to have no access to our servers at that time.
it is now running fine. But our IT director wants us to give him an answer to the caused of that event and bring up a pre...
sorry for the late reply.
Yes guys, it was due to the missing static route in 4948
there was no "IP routing" command found in the config of 4948, and i thought it doesnt require static route with trunking enabled.
thanks all :)
Hi
IP routing is only enabled on 3750
i have also added ip default-gateway 10.1.2.1 on 4948
but it still the same, anything else that i might missed out ?
Cisco 3750
interface gi1/0/24 is connected to PC
interface Te1/1/2 is uplink to 4948
ip routing
interface GigabitEthernet1/0/24 switchport access vlan 10 switchport mode access
interface GigabitEthernet1/1/1!interface GigabitEthernet1/1/2!interf...
