Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
our VoIP provider sent us the following configuration to apply to our ASA to QoS our VoIP traffic.
Can someone break down for me what exactly it is doing? are both instances of bandwidth in bps representative of the bandwidth I want reserved for ...
have an ASA I recently upgraded from old code to newer 9.2
In the old code I would add the following static...
static (inside,dmz) 192.168.100.0 192.168.100.0 netmask 255.255.255.0
This would allow hosts in the dmz (with appropriate accompanying ac...
Trying to upgrade this one 5505 from 8.2.1 to a current (and patched for the recent RCE/DoS vulnerability) version. I have done 3 or 4 others this week but this one is giving me problems.
I tried to go from 8.2.1 to 8.4.6 to 9.2.4.25 which I belie...
old school PIX ASAer here who is lost in the new code
I am setting up an ASA running 9.4.4 and trying to use port forwarding with the outside interface IP address to forward the necessary ports to a video conferencing server.
It seems as though t...
Interested in hearing some thoughts from the community on the use of OCSP vs CRL for certificate validation when using certificates for authentication/authorization on an anyconnect VPN.I was thinking that1)OCSP is theoretically more efficient/effect...
Thanks for the response, I believe you have answered my question but I am just not 100% clear on the difference in your two scenarios.
I do not plan on actually translating any addresses when inside talks to DMZ or DMZ talks to inside....
At the ...
I did verify the integrity of the images I had uploaded, no issues there.
I wound up formatting the flash, going back to the base code so I could reload the config, and then upgraded multiple times without issue.
thanks for the help!
I have confirmed it has the required 512 ram so that should be all setcan you elaborate on the register setting thing? First I have heard of that. Not sure what that is/does or how/why/if I should/can change it? The main reason I was reluctant to...
that appears to have done it,thanks. I figured it was something being interpreted backwards but didnt know if it was an ACL, NAT statement, object etc
My goal is to expose the inside server to the outside on a number of ports, using port forwarding on the outside interface to map those ports to the internal server.
As such I used a destination port of 443 in the packet tracer to simulate an incomi...
