Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have 50 Mb Comcast cable conencted to 2951. There is another conenction to AT&T 20 Mb circuit which goes thru' an ASA 5510. Path to Internet is as below.3750 Stack------Barracuda---------2951------------Comcast ...
Hello,I have an 881W with configuration posted below along with IOS version. The site has a local Exchange server and also a LAN-to-LAN IPSec. Exchange's internal IP is statically NAT'd. Problem is that when that when a static NAT for Exchange is...
Hello,We have a CSS 11503 with the following partial config==================service 10.10.10.221-1724 ip address 10.10.10.1 keepalive type tcp port 1724 keepalive port 1724 active service 10.10.10.222-1724 ip address 10.10.10.1 keepalive type...
Hello,It has been a while since I last worked on firewall. Please take a look at info below.INSIDE does not have access to Internet Services/Servers in DMZ need to be accessible from InternetCONFIGnames!interface Ethernet0/0 nameif outside security...
Hello,We have Unity 5 with Exchange 2007 SP1 on Windows 2003 SP1 Enterprise server. We want to upgrade Exchange to SP2 or SP3 but I could not find enough information, may not have looked in right places.Does anyone have Unity with Exchange 2007 with...
Hello Joseph and Marco - you guys are correct. Comcast is 50 Down/10 Up. AT&T is 20/20. The problem reported however is during course of normal Internet browsing.
Hi Daniel,Thanks for your post. We did plan on packet capture on device between .222 server and load balancer and will add item to check routing on. 222 server. Good point.Thanks again,Paresh.
