Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 2811 router with default route 0.0.0.0 0.0.0.0 192.168.1.1 (my ISP Lan-side interface). I have DHCP server on the router for wired interfaces (e.g. 172.16.11.0 /24 through 172.16.18.0 /24) with 8 VLANs (711 - 718), but none of the 172.16 ra...
Hi Mohammad, I looked at https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html and found the following output for Bangladesh. It depends on the Model of AP and whether it's Indoor, or Outdoor Industrial, Here's the ou...
I modified some of the suggestions in the attached .txt file, but these suggestions did the trick. When I first tried, I lost connectivity to the switch. Then I realized that the management SVI was being deleted, along with the other SVIs that were ...
I called the ISP and they advised they would be unable to help with my issue as they don't support any routers other than their own gateway. The also advised that they removed the static route configuration for security purposes. In other words, th...
Thank you @chrihussey for noticing my config uploads failed. I had previously uploaded them but I had to step away, so when I got back to my post, I had to repost everything and forgot to re-upload the configs. Nothing in the 172.16.x.x can ping th...
Try this:FIND THE OFFENDING USER'S VTY CONNECTION: In this case, I show two connections:'cisco' on line vty 0 and'bilbo' on line vty 1First, I show the results using the 'show users' command,Second, I show the result using the show ssh command,Third...
