Hi,I have a CCME 4.2 installed on a 2821 Router and FXO connected to it. I had connected PSTN line on the FXO. dial-peer voice 10 potsdestination-pattern 9........port 0/3/0..I am unable to make outgoing/ incoming calls. pls help....
You can go ahead delete the private config.. Nothing happens.The command is disabled coz you LAP was trying the reach a controller that is unavailable. Did you try re imaging the AP or jus did a reset.Regards,
Hi,The reason could be the LAP is unable to clear the previous config and release the new one.- You can try the below commands and erase the private configclear lwapp ap ip addressclear lwapp ap controller ip addressclear lwapp ap hostnameclear lwapp...
Hi Paul,As far as I know Web Auth on 4.x code will work properly. Could you pl check the guest user config on the WLC.. The link below will be provide some information. http://www.cisco.com/en/US/docs/wireless/technology/guest_access/technical/refere...
Hi Paul,Its quite easy if you configure VLANs in both Switch & WLC properly.- Configure the VLANs on the WLC and associate with the SSID's- Configure trunk in the Switch- Provide option43 on the DHCP Server so that LAP request are forwarded to WLC.- ...