Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I deployed an Aironet 1832i AP with Mobility Express, updated the firmware to the latest 8.10.112.0 and I am struggling with making a WLAN use VLAN 4 (Changing "Native VLAN ID" to 4). The problem is the configuration doesn't save (the value r...
Hello, I have an AP Aironet 1832i with Mobility Express 8.8 installed, and I can't seem to find the following:- Session Timeout (https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-8/config-guide/b_cg88/wlan_timeouts.html). It mentions I nee...
I had this issue before (rebooting for no reason) with 8.10.112.0. The one I found to be stable in my case was 8.8.120.0 (you might want to try that one). The other option (and to rule out not being on the latest) is to try 8.10.121.0 (which is the ...
Thanks Scott, When you say "You have to create the vlan first either through the GUI", how is that done using the web interface? I thought this was only configured under "WLAN Settings -> VLAN and Security" tab only. Is there any other place to conf...
Thanks Scott for the reply and the corrected guide. I would think these options should be available in ME on this model, because these are the ones I am missing on my WLANs to comply with the Best Practices review (also in the GUI). I enabled Expert ...
