Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there Merry Xmas..We have two 3750 core switches and one mpls switch.Core Switch B connects to switch A via port channel. The Mpls switch connects directly to switch A.Switch A is hsrp active for all vlans.We would like to connect the MPLS switch ...
Hi,We have an IPCC Express server running ver 7.01 and Agent Desktops running ver 6 on XP Machines.We are now rolling out win7 PC's and need to run the agent desktop software on them.We downloaded the new 7.62 ver but had a dll issue on win7. This wa...
Hi there,We have two 3750 switches setup on local lan. Switch A is primary switch and has ospf setup on it and is a neighbour to a local MPLS Switch. Switch B has etherchannel to Switch A and default route out is switch A. hsrp on all interfaces has ...
Hi All,Got a question regards cluster comparison..What's the pros and cons of a single cluster versus a dual cluster?Currently have Dual cluster of 5000 and 1000 endpoints and want to know what are the benefits or disadvantages of moving to single c...
Thanks for the reply.The mpls switch is currently sitting in a vlan with the core switches but we are able to make these routed ports. Whats the advantage of this?Does it matter that both routed ip addresses on the MPLS switch will be in the same sub...
A ping test was done from a PC connected to core switch A across the MPLS network. After about 20mins or so this would drop and i would need to reset the connections to the MPLS switch. No idea why this happens. But it did it twice.
Access switches have uplink trunks to the 3750 core switches.Core Switch A is the primary HSRP active device for all vlans.Core Switch A has ospf currently running ok on it. Its neighbour is the MPLS Wan switch.Core Switch B had HSRP on all interface...
