I have a CUCM 10.5 and Gateway 2951 with a E1 link with R2-digital signage and 4 analog lines. My calls to mobile phones leave the analog lines (dial-peer voice 5 pots)
I need that calls to mobile phones, from the extension 7201-7220, leave for my E1 interface.
I made the following configuration, but it worked.
dial-peer voice 5 pots
answer-address 26..
trunkgroup FXO_CEL_SP_RJ
corlist outgoing liga-celular
description **Ligacao Telefone Movel Local**
destination-pattern 0[7,9]T
dial-peer voice 111 pots
corlist outgoing liga-celular
description **Ligacao Telefone Movel Local**
answer-address 72..
destination-pattern 0[7,9]T
port 0/0/0:0
Can someone help me?