01-28-2014 01:38 AM
I have an ASA 5510 as VPN Concentrator, used for about 30 L2L-VPNs.
I need also some L2L-VPN with dynamic remote peer.
While the configuration for a single dyn-VPN is quite simple (as described in several examples), how can I configure the ASA in the case of many dyn-VPNs ?
Basically, all the dyn-VPN should use the same PSK (the one of DefaultL2LGroup).
But using "aggressive mode" on the remote peer, I could use a different PSK for each dyn-VPN:
tunnel-group ABCD ipsec-attributes
pre-shared-key *
Is this configuration correct ?
Best regards
Claudio
Solved! Go to Solution.
01-28-2014 02:49 AM
Hi,
Maybe the solutions provided in the following document might also be an option for you to configure multiple dynamic L2L VPN connections on the ASA
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080bc7d13.shtml
Hope this helps
- Jouni
01-28-2014 02:49 AM
Hi,
Maybe the solutions provided in the following document might also be an option for you to configure multiple dynamic L2L VPN connections on the ASA
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080bc7d13.shtml
Hope this helps
- Jouni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide