2 vpn tunnels on router to 1 asa - load balancing

[psfletcher]

Hi,

I have a project where i have a remote site and i need to transfer some pritty large files regularly.so we're installing 2 adsl lines to try to share the load.

i have a demo setup to try to get the config working. i'm using 2 ftp servers 1 on port 21 and 1 on port 3021.

the plan is to send ftp 1 (port21) up adsl 1 dialer0 and ftp 2 (port 3021) up adsl 2 dialer1. both on the same source, and the clients are on the same server to.

Currently my config is not working. Any suggestions?i'm using access lists and route maps which i believe should work.

my first thought is can i use the same acl on the crypto maps in the route map?

thanks

Pete

[Julio Carvajal]

Hello,

First of all the ASA does not support load-balancing so my recommendation would be to play with routes as specific as possibles

Is the FTP server the same IP address?

What version are u running?

Rate all of the helpful posts!!!

Regards,

Jcarvaja

Follow me on http://laguiadelnetworking.com