Access to DMZ across a VPN Tunnel

[hajoca]

I have many site-to-site VPN tunnels terminating on a Cisco 3005 concentrator (on a 10. network). I would like to access resources on a DMZ (172.30. network) across this tunnel. How can this be performed?

[Richard Burts]

On the concentrator you need to configure a route to the 172.30 address space with an appropriate next hop. You need to make sure that whatever guards the DMZ will let the traffic through. You also need to be sure that the 172.30 devices have an appropriate route back to the concentrator address space.

HTH

Rick