09-05-2012 11:13 AM - edited 02-21-2020 06:18 PM
Hi,
For the Anyconnect client on the Macbook Air, 1) Can IPSEC be used?, 2) can split tunneling be disabled?
Solved! Go to Solution.
09-05-2012 11:45 AM
Hi,
For Mac:
AnyConnect
Enabling IPsec IKEv2 Connections
OS | AnyConnect 3.1 Predeploy Package Name |
---|---|
Mac OS X | anyconnect-macosx-i386- |
Cisco IPsec client
The Cisco IPsec client is not currently supported with MAC OSX 10.6 but the built-in MAC VPN client can be used. The common IPsec head-end configuration used for current Cisco IPsec VPN Client users should work with that client.
Split-tunneling can be disabled (just need to choose tunnelall)
ASA 8.x : Allow Split Tunneling for AnyConnect VPN Client on the ASA Configuration Example
Please check the following information:
Deploying the AnyConnect Secure Mobility Client
Release Notes for Cisco AnyConnect Secure Mobility Client, Release 3.1
Thanx.
Portu
Please rate any post you find helpful.
09-05-2012 11:45 AM
Hi,
For Mac:
AnyConnect
Enabling IPsec IKEv2 Connections
OS | AnyConnect 3.1 Predeploy Package Name |
---|---|
Mac OS X | anyconnect-macosx-i386- |
Cisco IPsec client
The Cisco IPsec client is not currently supported with MAC OSX 10.6 but the built-in MAC VPN client can be used. The common IPsec head-end configuration used for current Cisco IPsec VPN Client users should work with that client.
Split-tunneling can be disabled (just need to choose tunnelall)
ASA 8.x : Allow Split Tunneling for AnyConnect VPN Client on the ASA Configuration Example
Please check the following information:
Deploying the AnyConnect Secure Mobility Client
Release Notes for Cisco AnyConnect Secure Mobility Client, Release 3.1
Thanx.
Portu
Please rate any post you find helpful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide