AnyConnect DHCP Lease Time

[dcanady55]

Hello,

AnyConnect 4.8 using FMC 6.4 and 2110 FTDs. I've got a VPN profile using a DHCP server on my Inside. I've got the lease expiration set to 8 hours tried other lengths of time. No matter what the lease expires one hour after a PC connects. I cannot figure out what's overriding what I want to happen. Any advice would be appreciated. I did try and change the DHCP lease length under devices and DHCP server as its default is 60 minutes but that did nothing.

Thanks,

[Mohammed al Baqari]

Check in FCM under remote access VPN config > advanced > address assignment policy (what is the lease time)


**** please remember to rate useful posts

[dcanady55]

Hello Mohammed,

Were not using a local pool as we have it going to a DHCP server behind the FW on the Inside.