Hi All,
Kindly need your help. I was trying to built Remote Access VPN connection on my lab environment. The component is Router 2811 with (c2800nm-advsecurityk9-mz.124-22.T5.bin), Anyconnect Client ( anyconnect-win-3.1.05160-k9.pkg ), Laptop ( Firewall and Antivirus disabled, already register webvpndomain.com into hosts file on Win32/Driver/Etc ).
I was able to connect using anyconnect if I'm initiate connection via web (https://webvpndomain.com) and start tunnel connection SVC. I'm also able to reach my LAN and I get my private IP Address assigned by my vpn pool on the router. The problem is when I'm initiate connection to vpn directly from the computer, I mean I'm not using web (https://webvpndomain.com) and I'm just press "connect" on my anyconnect software that already installed on my Laptop the connection always fail. I get error message : Connection attempt has failed
Here I'm also attach my router configuration, so you can see what I've done or what mistake that I've made on the configuration.
Is anybody in here have experience this problem on deploying Remote Access VPN using webvpn and anyconnect as vpn client ?
I'm really appreciate anybody that get into this discussion
Best Regards,
Nanda
Best Regards,
Nanda Nurhadyan
